Chapter 2
2-22
To Attach the Optional USB 2.0 Ports:
1. Take out the USB 2.0 bracket
2. Locate the JUSB3 and JUSB4 pin headers on the motherboard.
3. Connect the USB cables from USB 2.0 bracket to the JUSB3 and JUSB4
connectors separately.
4. Place the USB 2.0 Bracket into the appropriate slot of the system case.
Note: The USB 2.0 controller is backwards compatible
with USB 1.1 spec. To use the USB 2.0 ports, you still
need to install USB 2.0 driver, which is supplied by
Microsoft for Windows
®
2000 and XP. If you have any
problems regarding USB 2.0 driver, please visit Microsoft
website for more information.
USB 2.0 Bracket
Connected to JUSB3 & JUSB4
Separately
To Next Page
Loading...
