MSI 845G Max - Page 66

BIOS Setup
3-21
tings are:
Internal VGA The system initializes the onboard VGA device.
AGP/Int-VGA The system initializes the installed AGP card first. If
an AGP card is not available, it will initialize the
onboard VGA device.
AGP/PCI The system initializes the installed AGP card first. If
an AGP card is not available, it will initialize the PCI
VGA card.
PCI/AGP The system initializes the installed PCI VGA card first.
If a PCI VGA card is not available, it will initialize the
AGP card.
PCI/Int-VGA The system initializes the installed PCI VGA card first.
If a PCI VGA card is not available, it will initialize the
onboard VGA device.
PCI IDE BusMaster
Set this option to Enabled to specify that the IDE controller on the PCI local
bus has bus mastering capability. Settings options: Disabled, Enabled.
PCI Slot1/6 IRQ Priority, PCI Slot2/5 IRQ Priority, PCI Slot3 IRQ Priority,
PCI Slot4 IRQ Priority
These items specify the IRQ line for each PCI slot. Settings: 3, 4, 5, 7, 9, 10, 11,
Auto. Selecting Auto allows BIOS to automatically determine the IRQ line for
each PCI slot.
Set IRQs to PCI or ISA
Press <Enter> to enter the sub-menu and the following screen appears: