E-3-9
BIOS Setup
Load High Performance/BIOS Setup Defaults
The two options on the main menu allow users to restore all of the BIOS settings to
High Performance defaults or BIOS Setup defaults. The High Performance Defaults
are the values set by the mainboard manufacturer for the best system performance
but probably will cause a stability issue. The BIOS Setup Defaults are the default
values also set by the mainboard manufacturer for stable performance of the
mainboard.
When you select Load High Performance Defaults, a message as below appears:
Pressing ‘Enter’ loads the default BIOS values that enable the best system perfor-
mance but may lead to a stability issue.
When you select Load BIOS Setup Defaults, a message as below appears:
Pressing ‘Enter’ loads the default values that are factory settings for stable system
performance.
MSI Reminds You...
The option is for power or overclocking users only. Use of high
performance defaults will tighten most timings to increase the system
performance. Therefore, a high-end system configuration is a must,
which means you need high-quality VGA adapter, RAM and so on. We
don’t recommend that users should apply the high performance
defaults in their regular systems. Otherwise, the system may be-
come unstable or even crash. If the system crashes or hangs after
enabling the feature, please CLEAR CMOS DATA to resolve the problem.
For more information, refer to “Clear CMOS Jumper: JBAT1” in Chapter
2.
To Next Page
Loading...
Need help?
General
