To Next Page

To Previous Page

Introduction to DigiCell

E-4-5

Communication

In the Communication sub-menu, you can see the status of all the LAN / WLAN /

Bluetooth on the screen if the hardware is installed. The first icon indicates the

onboard LAN on your system, the second icon indicates the wireless LAN status,

and the third one is the information about the bluetooth on your system. Click on each

item for details.

This icon indicates the information and connection status of onboard LAN,

which is read-only.

The second icon indicates the wireless connection. You may click this icon

to configure the advanced settings in the WLAN Card Mode dialogue box

(see the image on p.4-8). Please note that it is only available when the

Software Access Point is set to WLAN Card Mode.

The third icon indicates the connection using bluetooth devices. If your

system is connected to the bluetooth device, the icon will light up.

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE Neo3-F and is the answer not in the manual?

MSI 865PE Neo3-F Specifications

General