A-11
Realtek Audio
MS-7623
Appendix A
Eects Conguration Panel
There are two sound enhancement controls in Adeck: “Equalizer” and “Bass Manage-
ment”. When the Equalizer is selected, the user will see the 10 bands from 31Hz to
16kHz. The equalizer settings will only take eect after the user enables it by press-
ing the “On/O” button above the equalizer. There are seven preset equalizer settings
that can be selected: Classical, Dance, Pop, Rock, Vocal, Jazz and Party. Additionally,
the user can create custom settings and save them for later use. To save the current
equalizer setting, click on the “Save” button. To delete a setting, select the setting to be
deleted from the drop-down menu and click on the “Delete” button.
Equalizer Control
Default value
Equalizer On/O
Smooth Adjustment
Sound Eect
Delete Setting
Save Value
User Dened
Adjust Values
Below shows an example of an adjustment being made to the 500Hz band without the
“Smooth Slider” enabled.
If “Smooth Slider” is enabled, any adjustment to any of the Equalizer bands will cause
the surrounding bands to be aected so as to produce a smoother sound.