1-3
Getting Started
On-Board Peripherals
† On-Board Peripherals include:
- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
- 2 serial ports (Real *1/ Front *1)
- 1 VGA port (for 915G/915GV only, Optional)
- 1 parallel port supports SPP/EPP/ECP mode
- 1 Line-In / Line-Out / MIC-In 3 in 1 audio connector
- 8 USB ports (Rear * 4/ Front * 4)
- 1 RJ-45 LAN jack
LAN
† Realtek RTL8100C or 8110S (8110S is optional)
- Integrated Fast Ethernet MAC and PHY in one chip
- Supports 10Mb/s, 100Mb/s and 8110S supports up to 1000Mb/s
- Compliance with PCI v2.2
- Supports ACPI Power Management
Audio
† AC97 link controller integrated in ICH6.
† 6 channels S/W audio codec Realtek ALC655 codec
- Compliance with AC97 2.3 Spec
- Meets PC2001 audio performance requirement
BIOS
† The mainboard BIOS provides “Plug & Play” BIOS which detects the peripheral
devices and expansion cards of the board automatically.
† The mainboard provides a Desktop Management Interface (DMI) function which
records your mainboard specifications.
Mounting and Dimension
† M-ATX Form Factor: 24.4 cm (W) x 24.4 cm (L)
† 8 mounting holes
To Next Page
Loading...
