29
Memory Fast Boot [Auto]
Enables or disables the initiation and training for memory every booting.
when booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting.
DRAM Voltage [Auto]
Sets the value for appointed voltage related to DRAM. If set to “Auto”, BIOS will set
these voltages automatically or you can set it manually.
CPU Memory Changed Detect [Enabled]
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled] The system will issue a warning message during boot and than
needs to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
CPU Technology Support
features does the installed CPU support. Read only.
MEMORY-Z
timings of installed memory. You can also access this information menu at any time
by pressing [F5].
DIMMX Memory SPD
installed memory. Read only.
CPU Features
Hyper-Threading Technology [Enabled]
The processor uses Hyper-Threading technology to increase transaction rates
and reduces end-user response times. Intel Hyper-Threading technology treats
the multi cores inside the processor as multi logical processors that can execute
instructions simultaneously. In this way, the system performance is highly
improved.
[Enable] Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.
To Next Page
Loading...
