MSI Creator TRX40 - Page 40

40
Overview of Components
+
+
9. Insert the M.2 XPANDER-AERO GEN4 card into the PCI_E3 slot.
10. Use two screws to secure the M.2 XPANDER-AERO GEN4 card.
11. Connect the PCIE_PWR1 to the power supply.
12. Connect the case’s HDD LED cable to the JCASE connector.
13. Using the supplied HDD LED cable to connect the JMB connector and JFP1’s HDD
pins (pin 1 & pin3).
9
10
11
12
13
1
2 10
9
+ -
HDD LED
JFP1
PCI_E3