86
AMD RAID Configuration
Installing RAID Driver
New Operating System Installation
The following details the installation of the drivers while installing operating system.
1. During the operating system installation, after selecting the location to install
Windows click on Load driver button to install a third party RAID driver.
2. When prompted, insert the MSI USB drive and then click Browse.
3. Navigate to \\Storage\AMD\ the directory containing AMD RAID drivers, then click
OK.
4. Select the (rcbottom.inf) driver, click Next.
5. When prompted, click OK.
6. Click Browse and navigate to the directory \\Storage\AMD\ again, then click OK.
7. Select the (rcraid.inf) driver, click Next.
8. You have successfully installed the RAID driver, and Windows setup should
continue.
9. Leave the USB drive in the computer until the system reboots itself. Windows
setup will need to copy the files after the RAID volume is formatted, and Windows
setup starts copying files.
AMD RAIDXpert2 Management Suite Installation
1. Set the SATA Mode to RAID Mode in BIOS
2. Insert the MSI USB Drive into the USB port.
3. Click the Select to choose what happens with removable drives pop-up
notification, then select Run DVDSetup.exe to open the installer. If you turn off the
AutoPlay feature from the Windows Control Panel, you can still manually execute
the DVDSetup.exe from the root path of the MSI USB Drive.
4. Under the Drivers/Software tab, check the AMD RAID Drivers check-box.
5. Click the Install button.
6. When prompt you to restart, click OK button to finish.
7. Restart your computer and enter the Windows operating system.
8. Double-click the RAIDXpert2 icon to open the RAIDXpert2 Web GUI.
▪ Default credentials are:
▫ Username - admin
▫ Password - admin
9. Change the credentials:
▪ Create new username and password
10. Re-log into the RAIDXpert2 Web GUI with the new credentials.
To Next Page
Loading...
