CX600（MS-1682）Disassemble Guide
8、LOWER CASE ASSY
8.6：Remove the RJ11 from Lower case;
Component P/N Qty
RJ11 CABLE K10-3002131-V03 1
8.7：Remove the 4 screws (M2*3mm), then remove
the Speaker module from lower case;
Attention: the screw driver torque is 1.5-2.0Kgf-cm
Component P/N Qty
Screw E43-1203003-H29 4
Speaker Module S33-A020310-F33 1
Lower Case 307-681D221-Y31 1
To Next Page
