MSI H55M-E32 series - Core Component Installation

En-10
MS-7636 Mainboard
English
MS-7636 Mainboard
English
Memory
These DIMM slots are used for installing memory modules. For more information on
compatible components, please visit http://www.msi.com/index.php?func=testreport
DDR3
240-pin, 1.5V
48x2=96 pin
72x2=144 pin
Dual-Channel mode Population Rule
In Dual-Channel mode, the memory modules can transmit and receive data with two
data bus lines simultaneously. Enabling Dual-Channel mode can enhance the system
performance. The following illustrations explain the population rules for Dual-Channel
mode.
DIMM1
DIMM2
Important
DDR3 memory modules are not interchangeable with DDR2 and the DDR3 standard
is not backwards compatible. You should always install DDR3 memory modules in
the DDR3 DIMM slots.
In Dual-Channel mode, make sure that you install memory modules of the same type
and density in di󰘯erent channel DIMM slots.
To enable successful system boot-up (Lynn󰘰eld CPU especially), always insert the
memory modules into the DIMM1 󰘰rst.
Due to the chipset resource deployment, the system density will only be detected up
to 7+GB (not full 8GB) when each DIMM is installed with a 4GB memory module.
•
•
•
•
Installed
Empty