41
Installing M.2 Xpander-Z Gen 5 Dual card
Before installing the M.2 Xpander-Z Gen 5 Dual card, you need to install M.2 SSDs to
the M.2 Xpander-Z Gen 5 Dual card. And then install the M.2 Xpander-Z Gen 5 Dual
card to the motherboard, please follows the steps below for details.
1. Loosen the heatsink screws on the back of the card, and then remove the heatsink.
11
11
11
11
2. Move the EZ M.2 Clip screw according to your M.2 SSD length. Skip this step if you
install 2280 M.2 SSD.
22
3. Insert your M.2 SSD into the M.2 slot at a 30-degree angle.
4. Rotate the EZ M.2 Clip to fix the M.2 SSD.
30º30º
33
44
To Next Page
Loading...
