30
Overview of Components
M.2 XPANDER-Z Gen4 S card LED Control
You can turn on/ off the LEDs by the switches of the card.
+
+
M.2 EZ Access LED
M.2 LED switch FAN LED
FAN LED switch
M.2 Temperature LED
FAN LED
Off - The fan is off.
FAN LED switch - This switch is used to turn on/ off the FAN LED.
M.2 LED switch - This switch is used to turn on/ off the M.2 EZ Access LED and M.2
Temperature LED.
M.2 EZ Access LED - It indicate the status of M.2 SSDs.
Off - No M.2 SSD.
M.2 Temperature LED - It indicates the temperature of M.2 SSD.
Important
dependent on the M.2 SSD, processor and chipset being used.
To Next Page
Loading...
