MSI MEG Z590 GODLIKE - JBAT1: Clear CMOS (Reset BIOS) Jumper; BIOS_SW1: Multi-BIOS Switch

42
Overview of Components
JBAT1: Clear CMOS (Reset BIOS) Jumper

the motherboard to save system configuration data. If you want to clear the system




Reset BIOS
Resetting BIOS to default values
1. Power off the computer and unplug the power cord.
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and Power on the computer.
BIOS_SW1: Multi-BIOS Switch
This motherboard has two built-in BIOS ROMs. If one is crashed, you can shift to the
other for booting by sliding the switch.
BIOS B
BIOS A

Multi-BIOS LEDRed: BIOS B, White