38
Overview of Components
JDASH1 : Tuning Controller connector
1
2 14
13
1 No Pin 2
3 4
5 6 Ground
7 PSIN#_R 8 FP_RST#_R
9 10
11 12
13 14
1
88
Tuning Controller
JDASH1
Power
Reset
Using Tuning Controller
Tuning controller is a multiple functions module that helps you to monitor, control
and overclock the motherboard more easily. Please follow the instructions below to
understand the function of each button on the module.
Debug Code LED
for details.
OC button- / + -
BIOS > OC > Direct OC Button
Reset - this button allows you to reset the computer.
Power - this button allows you to power on and off the computer.
OC Fail Save - press and hold the button and start the system simultaneously to
OC Retry
up successfully.
Clear CMOS - power off the computer and than long press this button for 5-10
seconds to reset BIOS with defaults.
Connecting the JDASH1 and Tuning Controller module
To Next Page
Loading...
