CHAPTER 3 AWARD
®
BIOS SETUP
3-28
3.9 Load BIOS/Setup Defaults
This Main Menu item loads the default system values. If the CMOS
is corrupted, the defaults are loaded automatically. Choose this item and the
following message appears:
“ Load Setup Defaults (Y / N) ? N “
To use the Setup defaults, change the prompt to “Y” and press < Enter >
Note: The Setup defaults can be customized to increase performance.
However the BIOS defaults can always be used as a back up if
there is some problem with the mainboard operation.
To Next Page
Loading...
