3-12
MS-6728 ATX Mainboard
Advanced Chipset Features
DRAM Timing Setting...
Press <Enter> and to enter the sub-menu screen.
Configure SDRAM Timing by SPD
Selects whether DRAM timing is controlled by the SPD (Serial Presence Detect)
EEPROM on the DRAM module. Setting to [Enabled] enables the following fields auto-
matically to be determined by BIOS based on the configurations on the SPD. Selecting
[Disabled] allows users to configure these fields manually.
CAS# Latency
This controls the timing delay (in clock cycles) before SDRAM starts a read command
after receiving it. Settings: [2], [2.5], [3] (clocks). [2] (clocks) increases the system
performance the most while [3] (clocks) provides the most stable performance.
MSI Reminds You...
Change these settings only if you are familiar with the chipset.
To Next Page
Loading...
