3-20
MS-6728 ATX Mainboard
Integrated Peripherals
Please note that the options showed on your BIOS might be different
depending on the motherboard you buy.
USB Controller
This setting is used to enable/disable the onboard USB host controller. Setting options:
[Disabled], [Enabled].
USB Device Legacy Support
Set to [All Devices] if you need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS. Setting
options: [Disabled], [All Devices].
On-Chip IDE Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
To Next Page
Loading...
