MSI MS-6728 - Page 54

3-16
MS-6728 ATX Mainboard
USB Device Wakeup From S3
This item allows the activity of the USB devices (keyboard and mouse) to wake up
the system from S3 sleep state. Setting: [Enabled], [Disabled].
Resume On PME#
This field specifies whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or component is
detected. Settings: [Enabled], [Disabled].
Resume By RTC Alarm
This is used to enable or disable the feature of booting up the system on a scheduled
time/date from the soft off (S5) state. Settings: [Enabled], [Disabled].
RTC Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to [Enabled], the system will automatically resume (boot
up) on a specific date/hour/minute/second specified in these fields. Available settings
for each item are:
Alarm Date 01 ~ 31, Every Day
Alarm Hour 00 ~ 23
Alarm Minute 00 ~ 59
Alarm Second 00 ~ 59
Keyboard PowerOn Function
This item allows the activity of the keyboard to wake up the system from any state
(S3/S4/S5 state). Settings: [Any Key], [Specific Key], [Disabled].
Specific Key for PowerOn
This setting allows users to set a password (max. 5 letters) for the Keyboard Wakeup
function.
Mouse PowerOn Function
This item allows the activity of the mouse to wake up the system from any state (S3/
S4/S5 state). Settings: [Disabled], [Any Action], [Left-button], [Right-button].
MSI Reminds You...
If you have changed this setting, you must let the system boot up until it
enters the operating system, before this function will work.