3-22
MS-6728 ATX Mainboard
On-Chip IDE
Configuration
Settings in Windows XP/2000
(Maximum of 6 devices)
Settings in Windows 98/ME
(Maximum of 4 devices)
On-Chip ATA(s)
Operate Mode
Legacy Mode (not available)
ATA Configuration P-ATA Only P-ATA+S-ATA
S-ATA Keep Enabled Yes (not available)
P-ATA Keep Enabled (not available) (not available)
P-ATA Channel Selection Both (not available)
Combined Mode Option (not available) * S-ATA 1st Channel /
P-ATA 1st Channel
S-ATA Ports Definition P0-3rd. / P1-4th. P0-Master / P1-Slave
* When choosing S-ATA 1st Channel, you can use SATA1 & SATA2, IDE2.
When choosing P-ATA 1st Channel, you can use IDE1, SATA1 & SATA2.
Onboard LAN
This setting controls the onboard LAN controller. Setting options: [Disabled], [Enabled].
Load OnBoard LAN BIOS
This item is available for you to load the onboard LAN BIOS settings. Setting
options: [Disabled], [Enabled].
Onboard 1394
This setting controls the onboard 1394 device. Setting options: [Disabled], [Enabled].
AC’97 Audio
This item is used to enable or disable the onboard AC’97 (Audio Codec’97) feature.
Selecting [Auto] allows the mainboard to detect whether an audio device is used. If
an audio device is detected, the onboard AC’97 controller will be enabled; if not, the
controller is disabled. Disable the function if you want to use other controller cards
to connect an audio device. Settings: [Disabled] and [Auto].
Set Super I/O
Press <Enter> to enter the sub-menu and the following screen appears:
To Next Page
Loading...
