MSI MS-7043

VIA VT8237 Serial ATA RAID
B-9
Create and Delete Spare Hard Drive
If a RAID 1 array is created and there are drives that do not belong to other
arrays, the one that has a capacity which is equal to or greater than the array capacity
can be selected as a spare drive for the RAID 1 array. Select Create/Delete Spare
and press <Enter>, the channel column will then be activated. Select the drive that you
want to use as a spare drive and press <Enter>, the selected drive will be marked as
Spare. The spare drive cannot be accessed in an OS.
To delete a spare drive, highlight Create/Delete Spare and press <Enter>. The
spare drive will be highlighted, press <Enter> to delete the spare drive.