MSI MS-7101 User Manual

i
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
VOIR LA NOTICE D’NSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7101
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation
G52-M7101X1

MSI MS-7101 Specifications

General

Model	MSI MS-7101
Form Factor	Micro ATX
Socket	Socket 754
Memory Type	DDR
Maximum Memory	2 GB
Expansion Slots	1 x AGP 8x, 3 x PCI
Supported CPUs	AMD Athlon 64
Memory Slots	2
Storage Interfaces	2 x SATA
USB Ports	8 x USB 2.0 (4 rear, 4 via headers)
Onboard Audio	Realtek ALC655 (6-channel)

Summary

FCC-B Radio Frequency Interference Statement

Notice 1

States that unapproved modifications void user authority to operate the equipment.

Notice 2

Requires shielded cables and AC power cord for emission limit compliance.

Copyright Notice

Trademarks

Revision History

Safety Instructions

Battery Replacement Caution

Warns about explosion risk from incorrect battery replacement and specifies correct procedure.

Environmental Disposal

Advises separate collection and recycling of waste batteries for environmental protection.

Introduction

Layout

Specifications

CPU Support

Lists supported Intel Pentium 4 Prescott processors and Hyper-Threading Technology.

Chipset Details

Describes the Intel 865GV and ICH5 chipsets, including their features and interfaces.

Main Memory Support

Specifies supported DDR SDRAM types, size limits, and dual-channel configurations.

Expansion Slots

Details available expansion slots: AGR, PCI, and CNR.

On-Board IDE and SATA

Covers IDE controllers, Ultra DMA support, and Serial ATA ports.

On-Board Peripherals

Audio Features

Details the AC97 link controller and Realtek ALC655 audio codec.

LAN Features

Describes the Realtek 8100C integrated Fast Ethernet MAC and PHY.

BIOS Functionality

Explains Plug & Play BIOS and Desktop Management Interface (DMI) functions.

Physical Dimensions

Specifies the Micro-ATX form factor dimensions: 24.5 cm x 19.0 cm.

Mounting Holes

Indicates the presence of 6 mounting holes for installation.

Other Features

Covers PS2 keyboard/mouse support and hardware monitor functions.

Rear Panel Connectors

Hardware Setup Guide

CPU Installation

Details CPU socket type (LGA775) and the importance of installing a cooler.

Overheating Prevention

Emphasizes ensuring the cooling fan works properly to prevent CPU damage.

Overclocking Considerations

Discusses support for overclocking, cautioning about component tolerance and risks.

Memory Speed and CPU FSB Support

LGA775 CPU and Cooler Installation

CPU Uninstallation

Provides instructions for uninstalling the CPU, referencing installation steps.

Memory Installation

Memory Installation Reminders

Offers advice on CPU cooler installation, BIOS monitoring, and socket pin handling.

DDR Module Installation Guide

Power Supply Requirements

ATX 20-Pin Power Connector

System Power and Data Connectors

ATX 12V and IDE Connectors

Covers the ATX 12V CPU power connector and IDE/SATA interfaces.

Floppy and CD-ROM Audio

Describes connectors for floppy drives and CD-ROM audio input.

IDE and SATA Connection Advice

Provides reminders for IDE jumper settings and SATA cable handling.

Front Panel and Fan Connectivity

Front Panel I/O and Audio

Covers front panel switches, LEDs, and audio connectors.

Fan Power and USB Connectivity

Explains fan power connectors and front USB 2.0 headers with safety notes.

System Configuration and Expansion Slots

CMOS and Serial Port Configuration

Details Clear CMOS jumper function, precautions, and optional serial port.

Expansion Slot Details

Describes PCI and CNR slots, including PCI interrupt routing.

AGR Slot

Add-on VGA Card Installation

Provides instructions for installing an add-on VGA card during initial setup or later.

Compatible VGA Cards

BIOS Setup Utility

BIOS Main Menu Structure

Outlines the main BIOS menus: Standard CMOS, Advanced BIOS, Chipset, Peripherals.

Core BIOS Configuration

Covers essential settings for CMOS, advanced features, chipset, and peripherals.

Advanced BIOS Settings

System Management Settings

Covers Power Management, PnP/PCI Configuration, and PC Health Status.

Performance Tuning Settings

Explains CPU Clock Ratio, Auto Detect PCI Clock, and Spread Spectrum.

CPU Clock Settings

Load BIOS Defaults