3-13
BIOS Setup
Integrated Peripherals
VIA OnChip IDE Device
Press <Enter> to enter the sub-menu:
SATA Controller
It allows you to enable/ disable the SATA controller.
SATA Controller Mode
It lets you select the SATA controller mode.
IDE DMA transfer access
Setting to [Enabled] will open DMA bus master and execute DMA action in DOS,
which will make the data transferring faster.
OnChip IDE Channel 0/1
These allow you to enable/disable the IDE channel 0/1.
IDE Prefetch Mode
The onboard IDE drive interfaces support IDE prefetching, for faster drive
accesses. When you install a primary and/or secondary add-in IDE interface,
set this option to Disabled if the interface does not support prefetching.
VIA OnChip PCI Device
Press <Enter> to enter the sub-menu:
Azalia HDA Controller
It allows you to enable/ disable the Azalia HDA controller.
To Next Page
Loading...
