3-8
MS-7329 Mainboard
Floppy Drive A
This item allows you to set the type of floppy drives installed.
Halt On
The setting determines whether the system will stop if an error is detected at boot.
When the system stops for the errors preset, it will halt on for 15 seconds and then
automatically resume its operation. Available options are:
[No Errors] The system doesn’t stop for any detected error.
[All, But Keyboard] The system doesn’t stop for a keyboard error.
System Information
Press <Enter> to enter the sub-menu:
BIOS Version
This item shows the BIOS version of your system (read only).
Physical / Usage Memory
These items show the memory size of your system. You cannot change any
values in the these fields (read only).
CPU ID / Cache Size
These items show the CPU related information of your system (read only).
To Next Page
Loading...
