3-18
MS-7329 Mainboard
PNP/PCI Configurations
Primary Graphics Adapter
This setting specifies which graphic card is your primary graphics adapter. Select
[PCI], the system initializes the installed PCI VGA card first. If a PCI VGA card is not
available, it will initialize the PCI Express card.
PCI Latency Timer
This item controls how long each PCI device can hold the bus before another takes
over. When set to higher values, every PCI device can conduct transactions for a
longer time and thus improve the effective PCI bandwidth. For better PCI performance,
you should set the item to higher values.
PCI Slot 1 IRQ
This item specifies the IRQ line for each PCI slot.
To Next Page
Loading...
