2-11
Hardware Setup
The back panel provides the following connectors:
Keyboard
COM Port
USB Ports
Mic
L-Out
L-In
Mouse
LAN
RS-Out
SS-Out
CS-Out
Back Panel
USB Ports
Mouse/Keyboard
The standard PS/2
®
mouse/keyboard DIN connector is for a PS/2
®
mouse/keyboard.
USB Port
The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard,
mouse, or other USB-compatible devices.
Serial Port
The serial port is a 16550A high speed communications port that sends/ receives 16
bytes FIFOs. You can attach a serial mouse or other serial devices directly to the
connector.
LAN
The standard RJ-45 LAN jack is for connection to the Local Area Network (LAN). You
can connect a network cable to it.
Link IndicatorActivity Indicator
LED Color LED State Condition
Off LAN link is not established.
Left Orange On (steady state) LAN link is established.
On (brighter & pulsing)The computer is communicating with another computer on the LAN.
Green Off 10 Mbit/sec data rate is selected.
Right On 100 Mbit/sec data rate is selected.
Orange On 1000 Mbit/sec data rate is selected.
eSATA Port
(optional)
eSATA Port (optional)
The eSATA port is for attaching the eSATA external hard drive.
7346v1.0-2-Hardware.p65 2007/3/6, 上午 11:5811