3-23
BIOS Setup
The two options on the main menu allow users to restore all of the BIOS settings to
the default Fail-Safe or Optimized values. The Optimized Defaults are the default
values set by the mainboard manufacturer specifically for optimal performance of the
mainboard. The Fail-Safe Defaults are the default values set by the BIOS vendor for
stable system performance.
When you select Load Fail-Safe Defaults, a message as below appears:
Pressing OK loads the BIOS default values for the most stable, minimal system
performance.
When you select Load Optimized Defaults, a message as below appears:
Pressing OK loads the default factory settings for optimal system performance.
Load Fail-Safe/Optimized Defaults
PDF created with pdfFactory Pro trial version www.pdffactory.com
To Next Page
Loading...
