MSI MS-7596 (v1.x)

Hardware Setup ▍
MS-7596
2-3
Hardware Setup ▍
MS-7596
cpu (centraL proceSSing unit)
When you are nstallng the CPU, make sure to nstall the cooler to prevent overheatng.
If you do not have the CPU cooler, consult your dealer before turnng on the computer.
For the latest nformaton about CPU, please vst
http://www.ms.com/servce/cpu-support
Important
Overheatng
Overheatng wll serously damage the CPU and system. Always make sure the coolng
fan can work properly to protect the CPU from overheatng. Make sure that you apply
an even layer of thermal paste (or thermal tape) between the CPU and the heatsnk to
enhance heat dsspaton.
Replacng the CPU
Whle replacng the CPU, always turn o󰘯 the ATX power supply or unplug the power
supply’s power cord from the grounded outlet 󰘰rst to ensure the safety of CPU.
Overclockng
Ths manboard s desgned to support overclockng. However, please make sure your
components are able to tolerate such abnormal settng, whle dong overclockng. Any
attempt to operate beyond product spec󰘰catons s not recommended. We do not guar
-
antee the damages or rsks caused by nadequate operaton or beyond product spec-
󰘰catons.
Gold arrow
Introducton to AM3+ CPU
The surface of CPU. Remember to apply some thermal paste on t for better heat
dsperson.