MSI MS-7596 (v1.x)

B-2
SB710 RAID ▍
MS-7596
SB710 RAID ▍
MS-7596
raid configuration
Creatng and deletng RAID set and performng other RAID settng up operatons are
done n the RAID BIOS. Durng boot-up, a screen smlar to the one below wll appear
for about few seconds. Press <Ctrl-F> to enter FastBuld utlty.
Important
Be sure to enable the RAID functon for SATA devce n BIOS before con󰘰gurng the
Fastbuld Utlty.
The FastBuld menu screen wll appear. The Man Menu s used to choose the operaton
to be performed.