MSI MS-7596 (v1.x) User Manual

B-8
SB710 RAID ▍
MS-7596
SB710 RAID ▍
MS-7596
Installng the RAID Drver (for bootable RAID Array)
After you complete the RAID BIOS setup, boot from the Wndows CD, and the Wn-
dows Setup program starts.
Press F6 and wat for the Wndows Setup screen to appear.
Insert the 󰘱oppy that contans the RAID drver, press the “S” key to select “Specfy
Addtonal Devce”.
1.
2.
3.
When prompted, nsert the 󰘱oppy dsk and press Enter.
4.
Important
Please follow the nstructon below to make a SATA RAID drver for yourself.
Insert the MSI DVD nto the DVD-ROM drve.
Clck the “Browse DVD” on the Setup screen.
Copy all the contents n the :
for Wndows XP: \\ChpSet\AMD\XP\SBDrv\RAID7xx
for Wndows Vsta: \\ChpSet\AMD\VISTA\Packages\Drvers\SBDrv\SB7xx\RAID\
x86 (for 32bt) or x64(for 64bt)
The drver dsk for RAID controller s done.
•
•
•
-
-
•
For Wndows Vsta:
Durng the Operatng system nstallaton, after selectng the locaton to nstall Vsta
clck on “Load Drver” button to load RAID drve.
You should be shown a lst of avalable SCSI Adapters.
Select the compatble RAID controller for 32-bt/ 64-bt verson system and then
press ENTER.
The next screen should con󰘰rm that you have selected the RAID controller. Press
ENTER agan to contnue.
You have successfully nstalled the RAID drver, and Wndows setup should con
-
tnue.
Leave the dsk n the 󰘱oppy drve untl the system reboots tself. Wndows setup wll
need to copy the 󰘰les from the 󰘱oppy agan after the RAID volume s formatted, and
Wndows setup starts copyng 󰘰les.
5.
6.
7.
8.
9.
Note: for Wndows Vsta, you can copy the 󰘰les to a medum (󰘱oppy/ CD/ DVD or
USB)

MSI MS-7596 (v1.x) Specifications

General

Brand	MSI
Model	MS-7596 (v1.x)
Category	Motherboard
Language	English