MSI MS-7599 - Advanced Overclocking Controls Guide

En-33
Englsh
OC Steppng
Ths tem wll be enabled after you set the overclockng frequency n the “Adjust CPU
FSB Frequency (MHz)”. And the followng tems wll appear. Ths tems wll help the
system to overclock step by step after system bootng up.
Start OC Steppng From (MHz)
Ths tem s used to set the ntal FSB clock. The system wll boot wth the ntal FSB
clock, and start to overclock from ntal FSB clock to set FSB clock that you set n
“Adjust CPU FSB Frequency (MHz)” step by step.
OC Step
Ths tem s used to set how many steps for FSB colck overclockng.
OC Step Count Tmer
Ths tem s used to set the bu󰘯er tme for every step.
Adjust CPU Rato
Ths tem s used to adjust CPU clock multpler (rato). It s avalable only when the
processor supports ths functon.
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency. Read-only.
Adjust CPU-NB Rato
Ths tem s used to adjust CPU-NB rato.
Adjusted CPU-NB Frequency (MHz)
It shows the adjusted CPU-NB frequency. Read-only.
CPU Core Control
Ths tem allows you to select the number of actve processor cores.
OC Gene Lte
Settng ths tem to [Enabled] allows the system to detect the maxmum FSB clock and
to overclock automatcally. If overclockng fals to run, you can try the lower FSB clock
for overclockng successfully.
OC Dal Functon
Ths tem allows you to enable/dsable the OC Dal functon. Settng to [Enabled] act
-
vates the followng 󰘰elds, and use the followng 󰘰elds to set each OC Dal functon.
OC Dal Step
Ths tem s used to set value of each step when you rotate the OC dal knob.
OC Dal Reset
Select [Reset] f you need to reset the OC Dal Value.
OC Dal Value
Ths tem ndcates the overclockng value by OC dal functon. When you rotate the OC
dal knob, ths value wll change.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶