MSI MS-7666 - Page 63

BIOS Setup
MS-7666
Chapter 3
3-13
BIOS Setup
MS-7666
Chapter 3
Restore On AC Power Loss
This item speci󰘰es whether your system will reboot after a power failure or interrupt
occurs. Settings are:
[O󰘯] Always leaves the computer in the power o󰘯 state.
[On] Always leaves the computer in the power on state.
[Last State] Restore the system to the status before power failure or interrupt
occurred.
Wake Up Event Setup
Press <Enter> and the following sub-menu appears.
Wake up Event By
Setting to [BIOS] activates the following 󰘰elds, and use the following 󰘰elds to set the
wake up events. Setting to [OS], the wake up events will be de󰘰ned by OS.
Resume From S3 By USB Device
The item allows the activity of the USB device to wake up the system from S3 (Sus-
pend to RAM) sleep state.
Resume From S3 By PS/2 Keyboard / Mouse
These items determine whether the system will be awakened from what power sav-
ing modes when input signal of the PS/2 keyboard/ mouse is detected.
Resume By PCI-E Device
When set to [Enabled], the feature allows your system to be awakened from the
power saving modes through any event on PCIE device.
Resume By RTC Alarm
The 󰘰eld is used to enable or disable the feature of booting up the system on a
scheduled time/date.
Date/ HH:MM:SS
If Resume By RTC Alarm is set to [Enabled], the system will automatically resume
(boot up) on a speci󰘰c date/hour/minute/second speci󰘰ed in these 󰘰elds (using the
<+> and <-> to select the date & time settings). Available settings for each item
are:
[Date] 01 ~ 31, Every Day
[HH:MM:SS] 00 ~ 23 : 00 ~ 59 : 00 ~ 59
▶
▶
▶
▶
▶
▶
▶
▶