Power Management Setup
Important
S3-related functions described in this section are available only when the BIOS sup-
ports S3 sleep mode.
ACPI Function
This item is to activate the ACPI (Advanced Conguration and Power Management
Interface) Function. If your operating system is ACPI-aware, select [Enabled].
ACPI Standby State
This item species the power saving modes for ACPI function.
EuP 2013
This item is designed for Energy Using Products Lot 6 2013 (EuP) aka Energy Related
Products (ErP). To reduce Power Consumption when system o or standby mode.
Note: When “Enabled” EuP 2013 setting, system don’t support RTC wake up event
function.
S4/S5 PowerOn Wait (Sec)
This item allows you to select a waiting period when system wake-up from power state
S4/S5.
▶
▶
▶
▶
To Next Page
Loading...
