MSI MS-7793

En-10
MS-7793 Manboard
Poston the coolng set onto the
retenton mechansm.
Hook one end of the clp to hook
󰘰rst.
5. Then press down the other end of the
clp to fasten the coolng set on the
top of the retenton mechansm.
Locate the Fx Lever and lft up t .
6.
Fasten down the lever.7. Attach the APU Fan cable to the APU
fan connector on the manboard.
8.
Important
Whle dsconnectng the Safety Hook from the 󰘰xed bolt, t s necessary to keep an
eye on your 󰘰ngers, because once the Safety Hook s dsconnected from the 󰘰xed
bolt, the 󰘰xed lever wll sprng back nstantly.
Con󰘰rm that the APU cooler has formed a tght seal wth the APU before bootng
your system.
Please refer to the documentaton n the APU cooler package for more detals about
APU cooler nstallaton.
•
•
•