3-5
MS-9856
Main
System Time
This setting allows you to set the system time. The time format is <Hour>
<Minute> <Second>.
System Date
This setting allows you to set the system date. The date format is <Day>,
<Month> <Date> <Year>.
Primary IDE Master/Slave, SATA1/2
[Type] Press PgUp/<+> or PgDn/<-> to select
[Manual], [None] or [Auto] type. Note that the
specications of your drive must match with
the drive table. The hard disk will not work
properly if you enter improper information for
this category. If your hard disk drive type is
not matched or listed, you can use [Manual] to
dene your own drive type manually.
[LBA/Large
Mode]
Enabling LBA causes Logical Block Address-
ing to be used in place of Cylinders, Heads
and Sectors
▶
▶
▶
To Next Page
Loading...
