MSI MS-9856 - Power

3-17
MS-9856
power
ACPI Aware O/S
This setting enables/disables ACPI (Advanced Conguration and Power In-
terface) support for Operating System. Set to [No] if your OS doesn’t support
ACPI and set to [Yes] if ACPI is supported.
Suspend Mode
This item species the power saving modes for ACPI function. If your operat-
ing system supports ACPI, you can choose to enter the Standby mode in S1
(POS) or S3 (STR) fashion through the setting of this eld.
Restore on AC Power Loss
This setting species whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before
power failure or interrupt occurred.
▶
▶
▶