3-18
BIOS SETUP
▍
USB Device Wakeup From S3/S4
This setting allows the activity of the USB device to wake up the system from
the S3/S4 sleep state.
Resume On LAN
This eld species whether the system will be awakened from power saving
modes when activity or input signal of onboard LAN is detected.
Resume On PME#
When setting to [Enabled], the feature allows your system to be awakened
from the power saving modes through any event on PME (Power Manage-
ment Event).
Resume On RTC Alarm
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
▶
▶
▶
▶
To Next Page
Loading...
