3-13
MS-9A29
Serial Port Console Redirection
Console Redirection
Console Redirection operates in host systems that do not have a moni-
tor and keyboard attached. This setting enables/disables the opera-
tion of console redirection. When set to [Enabled], BIOS redirects and
sends all contents that should be displayed on the screen to the serial
COM port for display on the terminal screen. Besides, all data received
from the serial port is interpreted as keystrokes from a local keyboard.
Console Redirection Settings
Press <Enter> to enter the sub-menu.
Terminal Type
To operate the system’s console redirection, you need a terminal
supporting ANSI terminal protocol and a RS-232 null modem cable
connected between the host system and terminal(s). This setting
species the type of terminal device for console redirection.
Bits per second, Data Bits, Parity, Stop Bits
This setting species the transfer rate (bits per second, data bits,
parity, stop bits) of Console Redirection.
Flow Control
Flow control is the process of managing the rate of data transmis-
sion between two nodes. It’s the process of adjusting the ow of
data from one device to another to ensure that the receiving device
can handle all of the incoming data. This is particularly important
▶
▶
▶
▶
▶
▶
To Next Page
Loading...
