3-14
BIOS Setup
▍
where the sending device is capable of sending data much faster
than the receiving device can receive it.
VT-UTF8 Combo Key Support
This setting enables/disables VT-UTF8 Combo Key Support.
Recorder Mode, Resolution 100x31
These settings enable/disable the recorder mode and the resolu-
tion 100x31.
Legacy OS Redirection Resolution
This setting species the redirection resolution of legacy OS.
Putty KeyPad
This setting species the type of Putty KeyPad.
Redirection After BIOS POST
This setting species the Redirection conguration after BIOS
POST.
[Disable] Turn off the redirection after POST
[Boot Loader] Set the Redirection to be active during
POST and Boot Loader
[Always Enable] Set the Redirection to be always active
▶
▶
▶
▶
▶
To Next Page
Loading...
Need help?
General
