•
Service Manual
Step
3.
Put the bracket to the 2.5"
HOD/
SSD and lock the screws.
A~
M3X4 screws * 4.
Step
4.
Find and connect the power
and signal cables.
Step
5.
Lock the bracket screws.
A~
Bracket screws *
4.
~
>
Installing
M.2
SSD
Step
1.
Unlock and remove the M.2
SSD screw. Keep the M.2 SSD screw
for later use.
A~
M2X4 screw *
1.
Step
2.
Slide the M.2 SSD device by
the direction as the figure shows.
A~
Align the notch on the M.2 SSD with
the
key on the slot and insert the SSD
into the slot.
Step
3.
Push down the M.2 SSD de-
vice and lock it with the M2X4 screw.
A~
M2X4 screw * 1.
Follow the above procedures
in
re-
versed order to remove the M.2 SSD.
Trident Series
l
•
To Next Page
Loading...
