2-19
Hardware Setup
The motherboard provides the following jumper for you to set the computer’s function.
This section will explain how to change your motherboard’s function through the use
of jumper.
Hardware Overclock FSB Jumpers: JB1, JB2 (optional)
You can overclock the FSB to increase the processor frequency by changing the
jumpers JB1 and JB2. Follow the instructions below to set the FSB.
Jumper
Important
Make sure that you power off the system before changing the jumpers
1
266 MHz
1
3
200 MHz
1
3
JB1 JB2
333 MHz
1
3
7345 Neo2v1.0CH2 Hardware Setup.p65 2007/5/17, 上午 11:2819
To Next Page
Loading...
