MSI PH61A-P35 (B3) - Page 46

3-10
BIOS Setup
MS-7732
Chapter 3
BIOS Setup
MS-7732
Chapter 3
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2 Speed, CPU Vcore Voltage,
CPU IO Voltage, DRAM Voltage, GPU Voltage, 3.3V, 5V, 12V
These tems show the current status of all of the montored hardware devces/com
-
ponents such as CPU voltage, temperatures and all fans’ speeds.
Power Management Setup
Press <Enter> to enter the sub-menu.
EuP 2013
Ths tem s desgned for energy usng products lot 6 2013 (EuP) aka energy related
products (ErP); to reduce power consumpton durng system o󰘯 or standby mode.
Note: Enablng EuP 2013 wll dsable support for RTC Wake Up Event.
Restore after AC Power Loss
Ths tem spec󰘰es whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Power O󰘯] Always leaves the computer n the power o󰘯 state.
[Power On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
CPU Phase Control
Ths tem allows you to select the power phase mode to reach the best power savng
functon.
Wake Up Event Setup
Press <Enter> to enter the sub-menu.
Wake Up Event By
Settng to [BIOS] actvates the followng 󰘰elds, and use the followng 󰘰elds to set the
wake up events. Settng to [OS], the wake up events wll be de󰘰ned by OS.
Resume By RTC Alarm
The 󰘰eld s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
▶
▶
▶
▶
▶
▶
▶
▶