MSI Trident Series - Rear View

I
•
Service Manual
Step 4. Slide and remove the auxiliary
graphics card support.
Step 5. Find and connect the power
cable for the graphics card.
Step 6. Line up the graphics card to
the expansion slot.
A~
Keep the gold finger and the slot
aligned.
Step 7. Push the graphics card till
it can not go futher. You will hear a
"click".
Step 8. Put and slide the auxiliary
graphics card support with the notch
and the board aligned.
A~
When a high end graphics card is
installed, the PCle slot might be
distorted for its weight
in long term; and
then, damage the motherboard. We
strongly recommend use the auxiliary
graphics card support
and graphics
card support to sustain its weight.
Step 9. Fasten the auxiliary graphics
card support with the screw.
A~
M3X4 screw * 1.
Trident Series
- ·-· - -- - - -- - -- - ~ - __ .-/
•