Software Installation
4-3
1. Insert the provided CD into the
CD-ROM drive. The autorun pro-
gram will start the setup program.
2. Click Install PowerCinema 3
Note: Support Windows XP
operating system only.
3. Follow the InstallShield Wizard
for PowerCinema.
4. Enter user’s information and se-
rial number. The serial number
can be found on the packing of
the provided CD.
Note: The CD-Key number
will be detected by the sys-
tem automatically.
4.2 Installing PowerCinema3 and Make DVD
Installing PowerCinema
To Next Page
Loading...
