Software Installation
4-31
1. Insert the provided CD into the
CD-ROM drive. The autorun pro-
gram will start the setup program.
2. Click Install Power2Go 4 - DVD
Note: Support Windows XP
operating system only.
3. Select the language for this
installation.
4. Follow the InstallShield Wizard
for Power2Go.
5. Enter user’s information and se-
rial number. The serial number
can be found on the packing of
the provided CD.
Note: The CD-Key number
will be detected by the sys-
tem automatically.
4.6 Installing Power2Go 4 - DVD
To Next Page
Loading...
