Software Installation
4-23
To capture video from your camcorder, click the Capture video button.
Select the video source (Composite, or S-Video), locate the video you want
to capture by using the playback control buttons, then click Start capturing.
The video is captured to your hard disk. Click the Stop button when you have
finished capturing the video content you want.
To modify your capture settings, click the Settings button. The Recording
quality option allows you to set the quality of video recorded from a digital
video source. The Analog recording quality option allows you to set the
quality of video recorded from an analog video source. The Analog audio
source option allows you to select an external analog audio device that is
connected through your audio card’s line in port or the microphone port. The
Captured video folder option allows you to set the default folder where
captured video files are saved. To change this folder, click the arrow button.
Browse to the new folder you want to set, then click Select and return.
Click the Restore default settings button to return your settings to their
default values.
Radio Function
You can use this function to listen to the radio over your computer.
To listen to the radio, search for
stations using the Backward scan
(scans backward to the next available
radio station), Forward scan (scans
forward to the next available radio
station), Fine-tune up (searches up
through the radio band), and Finetune
down (searches down through the
radio band) buttons on the control
panel, or select a station from the
Stations list. The station begins to
play and the frequency appears on the
control panel to the right of the volume
controls.
To display all available stations, click Stations list. This button toggles with
the Favorites list, which displays only the stations you add manually.
Note that clicking the Stations list or Favorites list button changes some of
the available options, which are described below.
To Next Page
Loading...
