MSI Z77A User Manual

B-5
MS-7752
Appendx B
In the Dsk 󰘰eld, press <Enter> key and use <Space> key to select the dsks you
want to create for the RAID volume, then clck <Enter> key to 󰘰nsh selecton. Ths
󰘰eld wll become avalable accordng to the selected RAID level.
Then select the strp sze for the RAID array by usng the “upper arrow”
or “down arrow” keys to scroll through the avalable values, and pressng
the <Enter> key to select and advance to the next 󰘰eld. The avalable val
-
ues range from 4KB to 128 KB n power of 2 ncrements. The strp sze should
be chosen based on the planned drve usage. Here are some typcal values:
RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB. Ths 󰘰eld wll become avalable
accordng to the selected RAID level.
Then select the capacty of the volume n the Capacty 󰘰eld. The default value s the
maxmum volume capacty of the selected dsks.
3.
4.
5.
[ ]
CREATE VOLUME MENU
[ ]
HELP
Name :
The default value ndcates the maxmum capacty usng the selected
dsks. Enterng a lower capacty allows you to create a second
volume on these dsks.
[ ↑↓] - Change [TAB] - Next [ESC] - Prevous Menu [ENTER] - Select
RAID Level :
Dsks :
Strp Sze :
Capacty :
Sync :
Volume0
RAID1(Mrror)
Select Dsks
N / A
XXX.X GB
N / A
Create Volume
Important
Snce you want to create two volumes, ths default sze (maxmum) needs to be re-
duced. Type n a new sze for the 󰘰rst volume. As an example: f you want the 󰘰rst
volume to span the 󰘰rst half of the two dsks, re-type the sze to be half of what s shown
by default. The second volume, when created, wll automatcally span the remander of
two hard drves.

MSI Z77A Specifications

General

CPU Socket	LGA 1155
Chipset	Intel Z77
Memory Type	DDR3
Memory Slots	4
Maximum Memory Supported	32GB
Form Factor	ATX
Memory Speed	1066/1333/1600/1866 MHz
SATA 3Gb/s Ports	4
USB 3.0 Ports	4
Onboard Video	Yes (via CPU)
Onboard LAN	Realtek 8111E