mspa B110 Blue Sea User Manual (English)

Other manuals for mspa B110 Blue Sea

Questions and Answers:

George VargasAug 5, 2025

What to do if my mspa B110 Blue Sea shows SPL or SPH error code?

J
Jordan MillerAug 5, 2025
If your MSpa Hot Tub displays the error code “SPL” or "SPH", first, turn off the power, plug it back in, and ensure the pin plugs are correctly connected before restarting. If the error persists, check for frozen water in the spa or control box; use warm water to thaw any ice and raise the water temperature above zero degrees. If the code is SPH indicating an abnormally high temperature, stop using the spa and contact your country's MSpa service center.

Ronald FletcherAug 19, 2025

How to fix error code HEF, BB F, FEF on mspa B110 Blue Sea Hot Tub?

K
Kyle JosephAug 20, 2025
If your MSpa displays error codes "HEF","BB F", or "FEF", turn off the power supply, then plug it back in. Ensure the pin plugs are correctly connected and restart the power pack operation. If the issue continues, contact your country's MSpa service center.

Brand	mspa
Model	B110 Blue Sea
Category	Hot Tub
Language	English

Brand

mspa

Model

B110 Blue Sea

Important Safety Instructions

Risk of Electric Shock

Guidelines to prevent electrical hazards and ensure safe use of the spa equipment.

General Safety Precautions

Essential warnings covering appliance usage, children, pets, and environmental risks.

Health and Usage Precautions

Injury Risk Reduction

Advice on water temperature, alcohol, medication, and medical conditions for safe spa use.

Physician Consultation Advice

Recommendations to consult a physician for specific health conditions before using the spa.

Installation and Site Requirements

General Site Requirements

Crucial requirements for spa placement, surface integrity, and environmental considerations.

Indoor vs. Outdoor Installation Considerations

Specific considerations for installing the spa indoors versus outdoors.

Spa Assembly and Preparation

Spa Assembly Steps

Step-by-step guide for assembling spa components, control box, and connections.

Ground Preparation and Placement

Instructions for preparing the ground and correctly placing the spa and control box.

Inflation and Air System Operation

Connecting Inflation Hose and Manometer

Procedure for connecting the inflation hose to the spa and manometer for air filling.

Air Pressure Monitoring and Adjustment

How to check and adjust spa air pressure using the manometer to avoid over-inflation.

Spa Filling and Lock Operation

Filling the Spa with Water

Instructions on filling the spa to the correct water level and avoiding pump failure.

Digital Lock Combination Change

Guide on how to change the combination of the digital lock for the spa cover.

Power Pack and Control Panel Operation

Control Panel Functions and Buttons

Overview of buttons, LED display, and functions for operating the spa's power pack.

Heating System and Temperature Settings

Explanation of the heating system, temperature settings, and factors affecting heating speed.

Spa Water Quality Maintenance

Filter Cartridge Care and Replacement

Guidance on using, cleaning, and replacing the spa's filter cartridge for optimal performance.

Water Chemistry and Sanitation

Recommendations for maintaining water pH, alkalinity, and chlorine levels for safety.

Spa Cleaning, Drainage, and Repair

Spa Cleaning and Drainage Procedures

Procedures for cleaning the spa interior and draining water for maintenance or storage.

Spa Pool Minor Damage Repair

Instructions on how to use the provided repair patch for minor damages to the spa pool.

Spa Storage and Disposal

Spa Storage and Seasonal Checks

Guidelines for proper spa storage, including drying and pre-season checks.

Product Disposal and Recycling

Information on environmentally responsible disposal and recycling of the spa product.

Troubleshooting and Safety Zones

Troubleshooting Common Spa Problems

Solutions for common operational issues, error codes, and control panel problems.

Water Protection Levels and Zones

Details on appliance water protection levels and safety zone classifications.

Warranty and Claims Information

Limited Warranty Terms and Conditions

Details on warranty coverage duration, conditions, and exclusions for MSpa products.

Warranty Claim Procedures

Requirements for making a warranty claim, including registration and authorized service.

mspa B110 Blue Sea User Manual

Table of Contents