mspa C-ST061 - User Manual

17 pages

To Next Page

To Next Page

Loading...

®

www.the-mspa.com

Due to MSpa's continuous product improvement process, MSpa reserves the right to change the specifications and appearance of its

products, which may result in updates to the instruction manual without prior notice.

PLEASE DO NOT RETURN THE PRODUCT TO THE STORE

QUESTIONS? PROBLEMS?MISSING PARTS?

For FAQ, Manuals, Videos or Spare Parts, please visit

www.the-mspa.com/support

EN

Owner’s Manual

C-TE041/061

C-OM061

Tekapo

Ottoman

C-BE041/061/081

C-ST061

Bergen

Starry

Table of Contents

Questions and Answers

K
Kevin RobinsonSep 8, 2025
What to do if the bubble air blower does not work on my MSpa Hot Tub?
- W
  Wesley JordanSep 8, 2025
  If the bubble air blower on your MSpa Hot Tub isn't working, it might have automatically turned off after 10 minutes. Wait for 10 minutes and then try turning the bubble button on again. Also, make sure the inflation knob is in the position before turning the bubble button on again. If it still doesn't work, it could be due to damaged internal parts, and you should contact your local MSpa Service Center.
R
Robert WilliamsSep 9, 2025
What to do if my mspa C-ST061 Hot Tub is leaking?
- G
  gmcbrideSep 9, 2025
  If your MSpa Hot Tub is leaking, there are a few potential causes. Check if the spa in&outlet connection is securely tight and tighten it if necessary. Ensure the drainage valve is completely closed. If the spa is still leaking after these steps, contact the MSpa Service Center. If the water leaks from the spa pool body, you can repair the leaking hole/split with the repair kit material.
S
Susan BeardSep 12, 2025
Why is my mspa C-ST061 losing air?
- B
  bhoodSep 12, 2025
  If your MSpa Hot Tub is losing air, the air valve might be loose. Inflate the spa until the Yellow section of the manometer is pushed out and ensure the valve is screwed tightly, replacing it if necessary. Also, inspect the spa tub for holes or splits. To find a leak, fill a squirt bottle with soapy water and spray it on the seams; small bubbles will appear where there's a leak. Clean and dry the leaking area before applying the repair patch supplied with your spa.
Y
Yvette BryantSep 13, 2025
What causes an mspa C-ST061 Hot Tub to be in an abnormal shape?
- C
  Carlos WilsonSep 13, 2025
  If your MSpa Hot Tub tub is in an abnormal shape, it could be due to extra air pressure caused by strong sunlight. Check the air pressure and release air if necessary. During hot weather, it is advisable to check whether some air should be released to avoid any possible damage to the spa pool.
R
robertjamesSep 15, 2025
Why is there no display on my MSpa Hot Tub control panel?
- E
  Eric McdonaldSep 15, 2025
  If the control panel on your MSpa Hot Tub isn't displaying anything, there are a few potential causes. First, check if the power socket is working; if not, try a different socket or repair the existing one. Next, ensure the PRCD (Portable Residual Current Device) is on by resetting it according to the PRCD Testing section. If the controller still doesn't display after resetting the PRCD, or if you suspect the PRCD is broken, it is best to contact the MSpa Service Center.
J
Jessica SalazarSep 18, 2025
Why is my MSpa Hot Tub tub in an abnormal shape?
- D
  dyerangelaSep 18, 2025
  If your MSpa Hot Tub tub is in an abnormal shape, it might be due to extra air pressure from strong sunlight. Check the air pressure and release air if necessary. During hot weather, it's a good idea to check and release some air to prevent damage to the spa pool.

mspa C-ST061 Specifications

General

Brand	mspa
Model	C-ST061
Category	Hot Tub
Language	English

Summary

Safety Precautions

Specifications

Bubble Spa Specifications

Details on dimensions, capacity, weight, and temperature increase rate for various MSpa models.

Control System Specifications

Technical specifications for the control system, including power, heater, and filter pump ratings.

Product Overview

Packaging Content

Lists and illustrates the components included in the spa packaging, with reference numbers.

First Use and Setup Preparation

Site Preparation and Requirements

Guidelines for selecting a suitable, flat, and safe location for spa installation.

Indoor Installation Requirements

Specific considerations for installing the spa indoors, including ventilation and floor materials.

Outdoor Installation Requirements

Considerations for outdoor placement, such as avoiding grass and direct sunlight.

PRCD Testing Procedure

Instructions on how to test the Portable Residual Current Device (PRCD) for electrical safety.

Spa Set-up

Assembly and Initial Setup

Steps for unpacking components, preparing the ground, and initial assembly of the spa.

Inflating the Spa Tub Wall

Procedure for inflating the spa's air bladder using the control unit and manometer.

Controller Operation

LED Display and Basic Controls

Overview of the controller's LED display and function buttons like Heater, Filter, and Bubble.

Heating Function

Instructions on how to operate the heater, set temperature, and understand heating indicators.

Filtration System

Details on activating and monitoring the filtration system, including filter cleaning reminders.

Bubble Massage Function

How to use the bubble massage feature and its automatic shutdown safety.

Heating Timer Function

Steps to set a timer for the heater to activate at a future time.

Safety Lock Feature

Procedure to lock and unlock the controller to prevent accidental operation.

Water Maintenance and Chemicals

Filter Cartridge Maintenance

Guidance on cleaning, inspecting, and replacing the spa's filter cartridge.

Spa Water Management

Recommendations for changing spa water, using shower before use, and keeping it covered.

Water Sanitation and Balance

Information on maintaining water quality through sanitation and balancing chemical levels.

Drainage, Cleaning and Storage

Spa Drainage Procedure

Step-by-step guide for draining the spa water and turning off functions.

Spa Tub Cleaning and Deflation

Instructions for cleaning the spa interior and deflating the tub for storage.

Spa Tub and Air Bladder Repair

Guide on using the included repair kit to fix punctures in the spa tub or air bladder.

Precautions for Seasonal Use

Summer and Sunny Day Precautions

Advice on managing air pressure and temperature in hot weather and direct sunlight.

Winter Use and Heat Preservation

Guidance for inflation, heating, and preventing freezing in cold weather conditions.

Rainy Day Considerations

Recommendations for using the spa in light rain and precautions for the bubble function.

Disposal and Environmental Protection

Troubleshooting

Error Code Chart

List of error codes, their causes, and recommended solutions for spa malfunctions.

Common Problems and Solutions

Troubleshooting guide for issues like no display, spa leaking, and heating problems.

MSpa Limited Warranty

Warranty Policies

Details on warranty coverage, exclusions, shipping, and registration for MSpa products.

Safety Guidelines

General safety advice for spa use, including supervision, safety devices, and user conduct.

Related product manuals

Preview: mspa MONO C-MO049

mspa MONO C-MO049

Preview: mspa Tekapo C-TE042

mspa Tekapo C-TE042

Preview: mspa Bergen C-BE082

mspa Bergen C-BE082

Preview: mspa Tekapo C-TE062

mspa Tekapo C-TE062

mspa Bergen C-BE062