mspa Bergen C-BE082 User Manual (English)

Questions and Answers:

M
Mark DoughertyAug 2, 2025
Why is my MSpa Hot Tub not heating properly?
- J
  James WilliamsAug 3, 2025
  Your MSpa Hot Tub might not be heating properly due to several reasons. The temperature might be set too low, so try setting a higher temperature. A dirty filter cartridge can also cause this issue, so clean or replace it. Ensure the water level is at least at the minimum line; if not, add more water. If none of these resolve the issue, it may require referring to the section regarding when the filter pump does not work.
S
Sean ShortAug 7, 2025
What to do if my MSpa Hot Tub is leaking?
- J
  johnsoncarolynAug 7, 2025
  If your MSpa Hot Tub is leaking, first check if the spa in&outlet connection is securely tightened. If not, tighten the connection. Also, ensure the drainage valve is completely closed. If water leaks from the spa pool body, repair the leaking hole/split with the repair kit material.
A
Angela HernandezAug 11, 2025
Why does the filter pump not work in my MSpa Hot Tub?
- L
  Laura JohnsonAug 11, 2025
  If the filter pump in your MSpa Hot Tub isn't working, it could be because the filter cartridge is clogged by dirt or other objects. Try cleaning or replacing the filter cartridge.
A
Andrea MillerAug 15, 2025
How to fix an mspa Bergen C-BE082 that loses air?
- A
  Angela GallegosAug 15, 2025
  If your MSpa Hot Tub is losing air, first check if the air valve is loose. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is screwed tightly. If necessary, replace the valve. Also, inspect the spa tub for any holes or splits. If you find a leak, clean and dry the area, then use the repair patch supplied with your spa.
J
Justin DennisAug 19, 2025
What to do if there is no display on the control panel of my mspa Bergen C-BE082 Hot Tub?
- A
  Amy SmithAug 19, 2025
  If there is no display on the control panel of your MSpa Hot Tub, first check the power socket. Change to a working socket or repair the existing one if it's faulty. Also, check if the PRCD is off; if so, reset it by following the PRCD Testing section.
K
Kimberly HarrisAug 25, 2025
Why is there no bubble in my mspa Bergen C-BE082?
- D
  David MayerAug 25, 2025
  If there is no bubble in your MSpa Hot Tub, it might be because the system auto-switches off after 10 minutes. Wait for 10 minutes and turn on the Bubble button again.
O
Olivia BenjaminAug 28, 2025
Why is my mspa Bergen C-BE082 in an abnormal shape?
- J
  joshuafordAug 28, 2025
  If your MSpa Hot Tub is in an abnormal shape, it could be due to extra air pressure caused by strong sunlight. Check the air pressure and release air if necessary. During hot weather, it is advisable to check whether some air should be released to avoid any possible damage to the spa pool.

mspa Bergen C-BE082 Specifications

General

Model	Bergen C-BE082
Category	Hot Tub
Dimensions	2.04 x 0.70 m
Water Capacity	Approx. 1, 100 Liters
Material	Reinforced PVC
Weight	Approx. 42 kg (dry)
Voltage	220-240V
Frequency	50Hz
Heating Power	2200W
Filter	Cartridge filter
Bubble Jets	138 Air Jets
Heater	2200W